Molded Blind Threaded Inserts (Fractional Sizes):

These inserts are designed to have the plastic molded around them in the mold cavity. This process involves the placement of “core pins” into the minor diameter of the inserts prior to molding the plastic. Once the molding operation is complete, the “core pins” are removed, leaving the insert encapsulated into the plastic. The mold-in method offers better adhesion of plastic to the insert, thereby providing higher torsional and pullout properties than most secondary operations.

Molded Blind Threaded Inserts (Fractional Sizes)

Thread Size EDP # A/H
Min.		 E
Nom.		 C S1 S2 Minor Diameter
Min. Max.
2-56 94200
94201
94202
94203
94204		 0.156 / 0.080
0.219 / 0.140
0.250 / 0.170
0.312 / 0.215
0.344 / 0.250		 0.156 0.142 0.030 0.030 0.0740 0.0770
4-40 94210
94211
94212
94213
94214		 0.205 / 0.100
0.281 / 0.170
0.344 / 0.230
0.406 / 0.280
0.438 / 0.325		 0.188 0.171 0.030 0.030 0.0960 0.0990
6-32 94220
94221
94222
94223
94224		 0.250 / 0.130
0.344 / 0.210
0.406 / 0.270
0.469 / 0.335
0.531 / 0.395		 0.219 0.202 0.030 0.060 0.1120 0.1180
8-32 94230
94231
94232
94233
94234		 0.250 / 0.130
0.344 / 0.220
0.406 / 0.285
0.469 / 0.345
0.531 / 0.395		 0.250 0.226 0.050 0.060 0.1380 0.1440
10-32 94240
94241
94242
94243
94244		 0.281 / 0.155
0.438 / 0.240
0.531 / 0.300
0.469 / 0.345
0.531 / 0.405		 0.281 0.259 0.050 0.060 0.1640 0.1700
¼-20 94250
94251
94252		 0.344 / 0.200
0.531 / 0.355
0.625 / 0.450		 0.344 0.321 0.060 0.090 0.2080 0.2180

 

Important: Above Inserts are made to order and are available in brass or stainless steel. Please specify when ordering.

Notes: Dimensions are in inches.

Tolerances: ±0.005